Farmall H (1939–1953): Checked Specs, Serial Dating, and How to Tell It From a Super H or M
The Farmall H is one of the most common old tractors in America, which is exactly why so much wrong information circulates about it. Horsepower figures that actually belong to the bigger Farmall M, brakes it never had, and Super H features credited to the H get repeated from one listing and video to the next. If you own one or are about to buy one, you need the real numbers, a way to date it, and a sure way to tell it from the Super H and the M.
Every figure on this page is linked to the source it came from.
The H in brief
International Harvester hired industrial designer Raymond Loewy to style its new tractor line, and the Farmall H and M were introduced together on August 9, 1939, at a Farmall Day celebration in Rock Island, Illinois (Farm Collector). The H replaced the F-20 as IH's two-plow row-crop tractor, rated for two 14-inch plows (Wikipedia). It was built at Rock Island through 1953, and Tractor Data counts 391,227 of them (Tractor Data).
Variants include the HV high-crop (Wikipedia gives 30.25 in of clearance) and, under the McCormick-Deering name, the W-4 standard-tread, I-4 industrial and O-4 orchard tractors. Tractor Data describes the H as the row-crop version of the W-4.
| Engine | IH C-152, 4-cylinder overhead-valve, 152.1 cu in (3-3/8 x 4-1/4 in), 1,650 rpm rated |
| Fuel | Gasoline, distillate or kerosene |
| Transmission | 5 forward, 1 reverse, sliding gear: 2.6, 3.5, 4.2, 5.1 and 16.4 mph forward, 2.8 mph reverse. Fifth gear was not enabled on tractors sold on steel wheels |
| PTO | Rear; 1-1/8 in shaft at first, 1-3/8 in shaft adopted in 1942 |
| Hydraulics | Lift-All hydraulic implement lift (listed as optional) |
| Brakes | Mechanical contracting band brakes; disc brakes from serial 391358 |
| Electrical | 6-volt, positive ground, generator; hand crank, with electric starting optional |
| Weight | 3,875 lb |
| Nebraska tests | Test 333, gasoline, Oct. 5–11, 1939: 26.20 belt hp, 24.17 drawbar hp, 3,603 lb max pull. Test 334, distillate, Nov. 6–11, 1939: 23.3 belt, 21.4 drawbar |
| Built | 1939–1953, Rock Island, Illinois; 391,227 |
Sources: engine from Tractor Data's engine page; gear speeds from its transmission page; transmission, PTO, hydraulics, brakes, electrical, weight and production from its main H page; the steel-wheel fifth-gear note from Wikipedia; the disc-brake serial break from the Yesterday's Tractors parts catalog, which lists band-brake parts for the H "to serial number 391357" and disc-brake parts for "H serial number 391358 and up." Test results are from Tractor Data's test page. The test numbers are confirmed by the University of Nebraska archive, which titles them Test 333: Farmall H Gasoline and Test 334: Farmall H Distillate. (Wikipedia's external link labels 334 as the gasoline test. The archive shows that's wrong.)
Those test numbers are maximums measured in the test. Tractor Data lists the H's claimed ratings as lower: 19 drawbar and 24 belt hp.
About the brakes
IH sales literature for the H and M describes two brake pedals at the right foot that can be used separately for turning or locked together, with bands acting on forged steel drums on the differential shafts (IH brochure, University of Nebraska archive). That's the band brake Tractor Data lists. The disc brakes came only at the very end of H production, from serial 391358, just before the Super H took over. An H with disc brakes is either one of those last tractors or has been converted.
H, Super H or M?
Super H (1953–1954). Tractor Data's Super H page lists:
- A C-164 engine: 164 cu in, 3-1/2 x 4-1/4 in. The bore grew; the stroke stayed the same.
- Mechanical disc brakes.
- A 5-speed transmission, the same count as the H but not the same gearing. Its transmission page lists 2.6, 3.8, 5.0, 6.6 and 16.2 mph forward and 3.2 mph reverse, against the H's 2.6, 3.5, 4.2, 5.1 and 16.4 mph and 2.8 mph reverse.
- Nebraska test 492 (April 27–May 13, 1953): 33.40 belt hp, 30.69 drawbar hp.
- 28,784 built.
The engine, the brakes and the gear speeds changed; the gear count didn't. And since late Hs also had disc brakes, discs alone don't prove a Super H. The engine size and the serial plate do.
Farmall M (1939–1954). The M is the H's bigger sibling, rated for three 14-inch plows (Tractor Data, M). It has a 247.7 cu in engine (3-7/8 x 5-1/4 in) rated at 1,450 rpm and weighs about 4,858 lb, roughly 1,000 lb more than an H. In its 1939 gasoline test (test 328) it made 36.66 belt and 33.1 drawbar hp, and Tractor Data lists its claimed ratings as 25 drawbar and 31–33 belt hp. Figures in that range belong to an M, not an H. Tractor Data's M serial table also carries an FBK prefix, which won't be on an H.
Where the serial number is and how to date it
Tractor Data gives the H's serial location as the left side of the transmission housing, and the Super H's as a plate on the left side of the clutch housing. According to IH journalist Kenneth Updike, writing for Octane Press, IH began using the clutch housing as a common tag location in the late 1930s, the numbers were always stamped rather than engraved, and IH didn't sell replacement serial tags.
Starting serial numbers by year, from Tractor Data. The Yesterday's Tractors table gives the same numbers.
- 1939: 501. 1940: 10653. 1941: 52387. 1942: 93237. 1943: 122091.
- 1944: 150251. 1945: 186123. 1946: 214820. 1947: 241143. 1948: 268991.
- 1949: 300876. 1950: 327975. 1951: 351923. 1952: 375861. 1953: 390500.
The Super H starts over at 501 in 1953, with 1954 starting at 22202 (Yesterday's Tractors), so a low number on its own doesn't tell you whether you have an early H or a Super H. If the plate has letters before or after the digits, use the digits to look it up, then check that the engine and brakes match.
Worked example 1 (made-up number): the plate reads 250417. That's above the 1947 start (241143) and below the 1948 start (268991), so it's a 1947 H. It should have band brakes and, being after 1942, the 1-3/8 in PTO shaft.
Worked example 2 (made-up number): a tractor sold as a "1953 Super H" has disc brakes and a plate reading 391500. That number fits the H table (past the 1953 start of 390500) and is past the 391358 disc-brake break, so it's one of the last Hs. Super H numbers started over at 501, and with 28,784 built they never came near 391500. Check the engine: a C-152 confirms an H.
What to check before you buy
- Engine. The C-152 has replaceable cylinder sleeves. Overhaul kits include sleeves and sleeve seals (Yesterday's Tractors catalog). Pull the dipstick and look for milky oil, which means coolant is getting in, and check the block and head for freeze cracks.
- Brakes. On band brakes, check that each pedal holds on its own and with the pedals locked together.
- Fifth gear. If the tractor started life on steel, fifth may not engage. Try every gear on a test drive.
- Hydraulics. If it has the Lift-All, raise an implement and see that it holds.
- Electrical. It's 6-volt, positive ground. If it will sit over winter, a 6-volt battery maintainer keeps the battery healthy.
- Shifting. The five-speed isn't synchronized. Stop before shifting; here's how a crash-box transmission works.
Mistakes to avoid
- Quoting M horsepower for an H. The H tested at 26.20 belt and 24.17 drawbar hp on gasoline. Numbers in the 30s are M (or Super H) figures.
- Saying the H had drum brakes at the wheels. It had bands on drums on the differential shafts, then discs only at the very end.
- Calling every disc-brake tractor a Super H. Hs from serial 391358 have discs too.
- Ordering parts without the serial. The parts catalog splits brakes, clutch, and main and rod bearings at 391357/391358, and PTO shafts changed in 1942.
- Trusting decals. Decals are easy to change. The serial number and engine size decide what it is.
The H's predecessor has its own guide: the Farmall F-20.