John Deere 4020 (1963–1972): Reading the Serial Plate, 24-Volt vs 12-Volt, and What to Check
There are a lot of 4020s still working, and a lot for sale, so the questions are practical. What year is it? Is it a diesel, gas or LP tractor, and does it have the Syncro-Range or the Power Shift? Is the electrical system the original 24-volt setup, a later 12-volt one, or somebody's conversion? On a 4020, the serial plate answers most of that if you know how to read it.
This page covers what the 4020 is, how to decode and date the serial plate, what the electrical change actually was and when it happened, and what to check before you buy.
The 4020 in brief
The 4020 replaced the nearly identical 4010 in Deere's New Generation line. It had more horsepower, heavier rear axles and a differential lock, and it stayed in production until the 4230 replaced it in 1972 (Wikipedia). Tractor Data lists Waterloo, Iowa, as the main factory (with some built in Mexico) and counts 184,879 built: 168,311 diesels, 8,123 gasoline and 8,445 LP-gas (Tractor Data). Deere's own history, quoted by GreenCollectors, calls it the most popular tractor of its time. The same source says Deere offered its Roll-Gard rollover protection on the 4020 in 1966, and that LP-gas was dropped late in the run as demand faded. The lighter, lower-priced 4000 was added in 1969 using the same engine, but only 7,987 were built (Wikipedia).
| Engine | 6-cylinder. Diesel: 404 cu in (4.25 x 4.75 in). Gasoline and LP: 340 cu in (4.25 x 4.00) through the 1965 model year, then 362 cu in (4.25 x 4.25). 2,200 rpm rated |
| Fuel | Diesel, gasoline or LP-gas |
| Transmission | Syncro-Range, 8 forward and 2 reverse (standard); Power Shift, 8 forward and 4 reverse (optional) |
| PTO | Independent rear, 540/1000 rpm; 1000 rpm front PTO available |
| Hydraulics | Closed-center, 2,250 psi |
| Brakes | Hydraulic wet disc |
| Electrical | Diesel: 24-volt starting on two 12-volt batteries until 1969, then 12-volt. Gas and LP: 12-volt. Tractor Data lists positive ground 1964–1969, negative ground 1969–1972, and the 24-volt system as floating |
| Weight | 8,225 to 9,560 lb depending on version |
| Nebraska tests | Test 849, diesel Syncro-Range, Sept.–Oct. 1963: 91.17 PTO hp, 76.36 drawbar hp. Test 850, gasoline: 88.09 PTO hp. Test 853, LP: 90.48 PTO hp. Test 930, diesel, Nov. 1965: 94.88 PTO hp, 83.79 drawbar hp |
| Built | 1963–1972, Waterloo, Iowa; 184,879 |
Sources: engine, transmission, PTO, hydraulics, brakes, weight, ground polarity and test results from Tractor Data's main, engine, transmission and test pages. The University of Nebraska archive holds the reports for test 849, test 850, test 853 and test 930. The battery details are from DTN/Progressive Farmer (below).
24 volts or 12: what actually changed
You'll sometimes hear that the 4020 went from 12 to 24 volts in 1966. It didn't. The change went the other way, and it came in 1969.
Tractor Data lists a 24-volt starter for the diesel and a 12-volt starter for the gasoline and LP engines, with positive ground through 1969 and negative ground after, and it lists the 24-volt system's ground as floating. GREEN Magazine describes the change on the console 4020 as 24-volt positive ground to 12-volt negative ground, with an alternator replacing the generator. Either way, check the polarity on the tractor in front of you before connecting anything. DTN/Progressive Farmer's "Ask the Mechanic" column (DTN) fills in the rest. A 4020 that came from the factory with two 6-volt batteries in series, making 12 volts, with a 12-volt alternator, is a 1969 or later model. Before that, diesels used two 12-volt batteries in series on the 24-volt system.
What did change in 1966 was the gas engine: Tractor Data says the 362 cu in engine became available that year, replacing the 340.
Syncro-Range or Power Shift?
Tractor Data describes the difference this way. On the Syncro-Range you stop and press the clutch to pick one of four shift stations, and then you can shift on the move between the two gears in that station using the clutch. The Power Shift shifts on the move without clutching and has four reverse speeds instead of two.
From the seat, the shift lever and pattern tell you which one it has. From the 1965 production year on, the serial plate tells you too.
Reading and dating the serial plate
Tractor Data puts the serial number plate on the rear of the transmission case. GreenCollectors explains the codes:
- Before serial 91000 (the 1964 production year): the code digits come first and the T follows them. First digit 2 = the 4010/4020 series, second digit = chassis (1 row crop, 2 standard, 3 high crop), then T = basic tractor, then the serial. GreenCollectors says a third digit for fuel (1 gasoline, 2 LP, 3 diesel) was added ahead of the T from mid-summer 1963, but its own sample number doesn't show one, so a 1964 plate may or may not carry it.
- From 91000 (example T211P091000R): T = basic tractor; 2 = series; then chassis (1 row crop, 2 standard, 3 high crop, 4 row-crop utility, 5 industrial); then fuel (1 gasoline, 2 LP, 3 diesel); then transmission (P = Power Shift, R = Syncro-Range); then the serial; and a final R for the Waterloo Tractor Works. A B prefix marks a sub-variant such as the 4000.
Starting serials by production year. GreenCollectors and Tractor Data agree:
- 1964: 65000. 1965: 91000. 1966: 119000. 1967: 145660. 1968: 173982.
- 1969: 201000. 1970: 222160. 1971: 250000. 1972: 260791. Final: 270288 (Tractor Data).
GreenCollectors notes that the 1964 production year began in mid-summer 1963. That's why Tractor Data dates the 4020 from 1963 while the serial tables start with 1964.
Worked example 1 (made-up number): the plate reads T213R187455R. T = basic tractor; 2 = 4020 series; 1 = row crop; 3 = diesel; R = Syncro-Range; serial 187455 falls between 173982 and 201000, so it's a 1968; the final R = Waterloo. As a pre-1969 diesel it should have the 24-volt starting system. If it has a single 12-volt battery, it's been converted.
Worked example 2 (made-up number): the plate reads 22T80150. The T comes after the code digits and there's no transmission letter, so it's the pre-91000 format: 2 = series, 2 = standard tread, serial 80150 = 1964. If a third digit sat before the T (223T80150, say), GreenCollectors would read it as the fuel code, 3 = diesel. Either way, check the engine and the shifter to confirm the fuel and transmission.
What to check before you buy
- Match the plate to the tractor. The fuel and transmission codes should match what's actually there. A diesel code on a gas tractor means the engine was swapped.
- Electrical system. Know whether it's the original 24-volt, the later 12-volt, or a conversion before you charge or jump it, and check that the alternator charges. For winter storage, a battery maintainer sized to the system helps.
- Engine oil capacity. Tractor Data notes most diesel 4020s went from 8 to 12 quarts with the 1969 model year (serial 201000); high-crops stayed at 8. Fill to the dipstick, not to a number from the wrong manual.
- Power Shift. It should shift up and down on the move without the clutch, with no slipping or long delays. GreenCollectors' spec list shows a transmission oil pressure light on Power Shift models and a transmission temperature gauge on the dash. Watch both on a test drive.
- Syncro-Range. Try every station and both gears within it. Unlike an older crash-box transmission, shifting between the two gears in a station on the move, with the clutch, is normal.
- Hydraulics and brakes. The closed-center system runs at 2,250 psi, and the brakes are hydraulic wet discs. Check that the hitch lifts and holds, that each brake pedal stops its wheel, and look for leaks at hoses and fittings.
Mistakes to avoid
- Assuming 12 volts. A pre-1969 diesel came with 24-volt starting. Hooking up 12-volt parts or a 12-volt charger without checking can damage them.
- Dating by the plate's first digits. The year is in the serial digits, not the codes in front of them.
- Ordering parts without the fuel and transmission codes. Gas, LP and diesel engines and the two transmissions take different parts.
- Treating a 4000 as a 4020. The 4000 shares the engine but is a lighter tractor with smaller rear axles (Wikipedia). Look for the B prefix.
- Believing "1963" means an early serial. A 4020 built in late 1963 is a 1964 production-year tractor with a number starting at 65000.
For a much older Deere, see the John Deere Model D.