TribeCreek Subscribe on YouTube

Home › Ford & Fordson › Thousand Series and the 1960s–70s (1961–1975)

Ford 2000 (1962–1975): Four-Cylinder or Three-Cylinder, How to Date It and What to Check

Updated November 21, 2026 · Sources are linked in the text

Ford used the name 2000 for two different tractors. The first, built for 1962 through 1964, was a four-cylinder closely based on the 601 Workmaster. The second, from 1965 to 1975, was an all-new three-cylinder, and it changed again in April 1968. Tractor Data puts it plainly: the three-cylinder 2000 "is an entirely different machine than the earlier (four-cylinder) model" (Tractor Data).

If you've inherited one, or you're looking at one for sale, the engine, parts and even the side of the tractor the numbers are stamped on depend on which 2000 it is. This page covers how to tell them apart, how to read and date the stamping, and what to check before you buy.

Video: Ford 2000 Tractor (1962–1965): History & Specs (3:11) · Watch on YouTube

A short history

Ford's four-cylinder Thousand Series tractors, the 2000 and 4000, came out in 1962, joining the six-cylinder 6000. The N Tractor Club describes the 2000 and 4000 as "basically the same as the 601 and 801 series tractors," with a restyled grille and Ford's new blue paint with lighter gray trim (N Tractor Club Quick ID guide). Tractor Data lists an offset cultivating version, the 2000 Offset (Tractor Data).

For 1965, Ford replaced the line with a worldwide range of 2000, 3000, 4000 and 5000 tractors, launched at the Royal Smithfield Show in December 1964 (Farmers Journal). The new 2000 had a three-cylinder engine of 2,590 cc (Koneviesti), which is the 158 cu in Tractor Data lists. The 2600 followed in 1975 (Tractor Data).

Specifications

1962–1964 (four-cylinder)1965–1975 (three-cylinder)
EngineGas: 134 cu in, 3.4375 x 3.60 in bore and stroke. Diesel: 144 cu in, 3.56 x 3.60 in158 cu in, 4.20 x 3.80 in, gas or diesel
FuelGas or dieselGas or diesel
Transmission4-speed, 5-speed, 12-speed over-under, or 10-speed Select-O-Speed4-speed, 6-speed, 8-speed dual range, or 12-speed (4-speed with over-under)
PTO540 rpm; live with the 5-speed, independent with Select-O-Speed540 rpm; transmission-driven (4-, 6- and 8-speed) or live (8- and 12-speed)
HydraulicsOpen center, 2,000 psi, 4.0 gpm, 2,360 lb lift at the arm endsOpen center, 2,500 psi, 4.0 gpm, 2,800 lb lift
ElectricalGenerator; gas 6-volt positive ground, diesel 12-volt negative groundGenerator, 12-volt, negative ground
Wheelbase / weight74.5 in / 3,020–3,362 lb75.8 in / 3,280–4,100 lb
Nebraska PTO hpNo test listed by Tractor Data (claimed 31 PTO hp)Gas: 30.57 (test 884, 12-speed), 30.85 (894, 8-speed), 30.58 (1054, 6-speed). Diesel: 32.09 (958, 12-speed), 31.19 (959, 8-speed), 31.97 (1053, 6-speed)

Sources: Tractor Data for the four-cylinder (engine, transmission) and the three-cylinder (engine, transmission, tests). PTO figures are at rated engine speed, from tests run in 1965, 1967 and 1970.

Tractor Data lists no Select-O-Speed for the three-cylinder 2000, and none of its Nebraska tests used one. The 6-speed was three speeds in two ranges, offered only with transmission PTO.

Which 2000 do you have?

Count the cylinders. Four spark plugs or injector lines means a 1962–1964 tractor; three means 1965 or later.

Look at the stamping. On the four-cylinder, the model and serial numbers are on the left side, on top of the starter mount casting (Tractor Data). On the three-cylinder, three lines are stamped on the right side of the flywheel housing, just behind the starter (Vintage Tractor Engineer).

Read the model number's shape. Both generations can show a model number starting with 2, which confuses people. A four-cylinder number is five digits, such as 21202, over a numbers-only serial. A three-cylinder code ends in a letter, such as 21022A, with a date code and a serial starting with B or C.

A four-cylinder 2000 or 4000? They look alike. Tractor Data lists a 74.5 in wheelbase for the 2000 against 84.5 in for the 4000. If the stamping is gone, the N Tractor Club lists the block casting numbers on the lower right side: CONN-6015C is the 134, CONN-6015J the 172. The Ford 4000 page covers its bigger sibling.

Before or after April 1968? Ford changed the sheet metal on the 2000 through 5000 in April 1968. Early tractors have a metal lower grille that wraps around the nose (Broken Tractor, listed for 1965–1968) and vented hood sides; suppliers list the plain side panels for tractors "after 1968, without vents" (Broken Tractor). The model code settles it: the first character is 2 before April 1968 and B after.

Reading and dating the numbers

1962–1964 four-cylinder

The N Tractor Club decodes the five digits like this: 2 for the 134 gas or 144 diesel engine; then 0 for industrial models built before 1963 or 1 for the later industrial and agricultural models (this picks the code list, it doesn't date the tractor); then two digits for chassis (10 row crop, 11 offset, 20 utility with adjustable front axle); then a last digit for transmission, PTO and hydraulics. With a 1 in second place, a last digit of 1 is four-speed with PTO, 2 is five-speed with live PTO, and 6 is Select-O-Speed with two-speed independent PTO. The full table is in the guide, and decoding the Ford Thousand Series walks through it.

Serials start in 1962 at 1,001, in 1963 at 11,948 (N Tractor Club) or 11,949 (Tractor Data), and in 1964 at 38,931.

Worked example (made-up numbers): 21202 over 27615. A 2000 on the later code list, utility with adjustable front axle, five-speed with live PTO. The serial falls in the 1963 range.

1965–1975 three-cylinder

Per Vintage Tractor Engineer, the three lines are:

  1. Model code. 2 (to March 1968) or B (from April 1968), two digits for chassis (10 agricultural all-purpose, 20 row crop), one for fuel (1 diesel, 2 gas), one for PTO (2 transmission 540, 3 live 540), and a letter for transmission (A 4-speed, C 8-speed).
  2. Date code. Year digit, month letter (A for January through M for December, with no I), day, and shift (A midnight, B day, C afternoon).
  3. Serial. B for Basildon, England, or C for the US, then the production number.

US serial starts from Tractor Data:

1965C1000001971C292100
1966C1242001972C327300 (C327200 on Tractor Data's 4000 and 5000 pages)
1967C1613001973C367300
1968C1902001974C405200
1969C2260001975C450700
1970C257600

Worked example (made-up numbers): 21022A / 6K05B / C140350.

  • 2: a 2000 built before April 1968.
  • 10: agricultural all-purpose.
  • 2: gas.
  • 2: transmission-driven 540 PTO.
  • A: 4-speed.
  • 6K05B: October 5, 1966, day shift.
  • C140350: between C124200 and C161300, so 1966. Serial and date code agree.

Tractor Data lists the same starting numbers for the 4000 and 5000 (apart from 1972), so the serial dates the tractor but doesn't name the model. A year digit of 5 can mean 1965 or 1975; the serial settles it. Basildon (B) numbers run separately, so date those from the date code.

What to check before buying

  • Stamping against the tractor. A gas code on a diesel, or a 4-speed code on a dual-range shifter, means parts were swapped. Buy parts for what's in it.
  • Electrics on a four-cylinder gas tractor. It left the factory 6-volt, positive ground. Find out whether it's been converted before you connect anything; the battery maintainer guide covers choosing a 6-volt one.
  • Live PTO. On a tractor with live PTO, the PTO should keep turning when you clutch to stop the tractor, and stop when you disengage it.
  • Gears. These are unsynchronized boxes, so stop before shifting (how a crash-box transmission works). Listen for jumping out of gear under load.
  • Engine. Check oil pressure warm, look for blue smoke and blow-by, and check the coolant for oil.
  • Hydraulics. Raise a heavy implement and let it sit. It shouldn't settle.

Mistakes to avoid

  • Ordering parts by "Ford 2000" alone. The four-cylinder's 134 or 144 and the three-cylinder's 158 are different engines, and grilles and hoods changed in 1968. Give the counter the model code and serial.
  • Looking only on the right side of a four-cylinder. Its numbers are on the left.
  • Reading a 21xxx model number as a three-cylinder code. Five digits and no letter means a 1962–1964 tractor.
  • Hooking a 12-volt battery to an unconverted 6-volt tractor. It can damage the starter, generator and gauges.
  • Using the US serial table on a B-prefix tractor. Basildon numbers aren't in it.

More videos on this tractor

All Ford & Fordson tractor guides →