Ford 901 Series (1958–1962): Identifying a 941, 961 or 981 Powermaster Row-Crop
The 901 Powermaster is the tall row-crop member of Ford's 1958–1962 01 series: the 172 cu in engine of the 801 on a high-clearance chassis built for cultivating. If you're looking at one, the emblem tells you very little. You need to know whether it's really a 901 and not a 1955–1957 900 with newer sheet metal, which of five models it is, what kind of front end it left the factory with, and whether the row-crop parts are sound.
This page covers all of that, plus how to date the serial and what to check before you buy.
What the 901 is
The N Tractor Club describes the 01 series as Ford's late-1957 replacement for the Hundred Series, sold as 1958 models. The 172 cu in gas or diesel 801 and 901 were the Powermasters; the 134 cu in tractors, including the 701 row-crop, were Workmasters (N Tractor Club Quick ID guide). LP-gas was also offered. The Select-O-Speed powershift was first offered in 1959; Farm Collector pictures a gold 1959 Ford 971 demonstrator with one (Farm Collector).
Tractor Data lists five 901 models, all built in Highland Park, Michigan, 1958–1962:
| 941 | 4-speed (the only four-speed in the 901 series) |
| 951 | 5-speed (PTO not live) |
| 961 | 5-speed, live PTO |
| 971 | Select-O-Speed, single-speed independent PTO |
| 981 | Select-O-Speed, dual-speed independent PTO |
Sources: Tractor Data's 941, 951, 961, 971 and 981 pages.
Specifications
| Engine | Ford 172 cu in 4-cylinder overhead-valve, 3.90 x 3.60 in bore and stroke, gasoline, LP-gas or diesel |
| Transmission | 4-speed (941) or 5-speed (951, 961) unsynchronized; Select-O-Speed 10 forward, 2 reverse full powershift (971, 981) |
| PTO | 540 rpm transmission-driven (941); 540 live (961); independent 540 (971) or 540/1000 (981) |
| Hydraulics | Open-center three-point hitch, 1,250 lb rated lift |
| Electrical | 6-volt positive ground (gas and LP); 12-volt negative ground (diesel) |
| Layout | Row-crop; front tread 8.3–16.3 in, rear tread 56–80 in, 27.9 in ground clearance |
| Weight / tires | About 3,300 lb (941, 971, 981), 3,317 lb (961); 5.50-16 front, 12-28 rear |
| Fuel tank | 17 gal |
| Nebraska tests | None listed for a 901 model; see the 801 tests below |
| Built | 1958–1962 model years (introduced late 1957) |
Figures from Tractor Data's 941 (dimensions), 961, 971 and 981 pages, with engine details from the 841 engine page.
Horsepower. Tractor Data lists no Nebraska test for any 901 model. Ford tested the same 172 cu in engine in 801 utility tractors: in test 641 (1958) a gasoline 841 made 44.71 belt hp and 41.44 drawbar hp, and in test 701 (1959) a gasoline Select-O-Speed 881 made 46.16 PTO hp (841 tests; 881 tests). A 901 should be in that neighborhood, but no 901 figure is published. Be wary of an ad quoting a "tested" number for one.
Telling it from its siblings
From a 900 (1955–1957). The N Tractor Club describes the 01-series Powermasters with a red hood center, gray hood sides, a new egg-crate grille, a new plastic hood medallion and new rear fenders. The 900 has the older NAA-style grille. On the stamping, a 900 ends in 0 (940, 950, 960) and a 901 ends in 1. Hundred Series row-crops were gasoline or LP only, so a diesel row-crop Ford of this shape is an 01 series. The 900 Series page covers the earlier tractor.
From a 701 Workmaster. Same row-crop layout, but with the 134 cu in gas or 144 cu in diesel, an all-red hood and the older grille. The stamping starts with 7.
From an 801 with a narrow front added. The stamping starts with 8. Tractor Data lists a 74.5 in wheelbase for the 801 utility.
Front end. The N Tractor Club lists the 01-series front-end suffixes after the model number: -1 for a tricycle with a single front wheel, -4 for high clearance with a wide front, and -5 for a factory wide front. Fronts get swapped, so compare what's on the tractor against the stamping.
Reading and dating the serial
The model number is stamped above the serial on the left side, on the flat area above and behind the starter. The serial sits between diamond symbols. Fuel suffixes are -L for LP-gas and -D for diesel (N Tractor Club).
| 1957 | 1,001 |
| 1958 | 11,997 (N Tractor Club, My Ford Tractors) / 11,977 (Tractor Data) |
| 1959 | 58,312 |
| 1960 | 105,943 |
| 1961 | 131,427 |
| 1962 | 155,531 |
Starting serials from the N Tractor Club guide, My Ford Tractors (through 1960) and Tractor Data. They differ only at the 1958 start. One sequence covers every 01-series model, so the serial dates the tractor but doesn't identify it.
Worked example (made-up numbers): 961-4-D over ◇119250◇.
- 9: high-clearance row-crop, 172 cu in.
- 6: five-speed with three-point lift and live PTO.
- 1: 01 series, so use the 01 chart.
- -4: high clearance with wide front.
- -D: diesel.
- 119250 falls between 105,943 and 131,426: a 1960.
Result: a 1960 Ford 961 diesel with a high-clearance wide front. If that tractor has a single front wheel and a gas engine, both have been changed, and parts should be ordered for what's on it.
What to check before buying
- The front pedestal and spindles. A narrow front carries the 172 on a small footprint. Jack it up, rock each wheel top to bottom, and look for spindle play and for cracks or welds around the pedestal.
- The Select-O-Speed on a 971 or 981. Farm Collector says the transmission had "growing pains" before Ford cleared up its problems. Warm it up and pull something in every gear. It should engage cleanly without slipping or a delay. The Ford 6000 page covers the transmission's reputation.
- The two-stage clutch on a 961. With the PTO running, half clutch should stop the tractor while the PTO keeps turning.
- Power steering, if fitted. The N Tractor Club lists it as a new 01-series option. Turn lock to lock with the engine running and look for leaks.
- The lift and the gear oil. Raise a heavy implement and see whether it settles; drain a little gear oil and look for milky water.
- The electrics. Gas and LP tractors left the factory 6-volt positive ground. Check for a 12-volt conversion before connecting a battery or maintainer.
Mistakes to avoid
- Running a tricycle like a wide-front. A narrow front tips more easily on side hills and in turns, especially with a raised implement.
- Hanging a heavy loader on a narrow front. It overloads the pedestal and spindles.
- Dating it with the Hundred Series chart. The 01 series restarted its serials. Read the third digit first.
- Assuming a five-speed means live PTO. Only the 961 has it; the 951's PTO stops when you clutch.
- Buying by the hood. A 901 hood on a 900 chassis is an easy swap. The stamping, the front-end suffix and the engine are what you're paying for.
For how the digits work across the whole family, see Decoding the Ford 01 Series.