TribeCreek Subscribe on YouTube

Home › Ford & Fordson › 01 Series (1957–1962)

Decoding Ford 01 Series Model Numbers (1957–1962): 501 Through 901, Digit by Digit

Updated November 21, 2026 · Sources are linked in the text

You're looking at a red Ford with a Workmaster or Powermaster emblem, and the stamping on the side says 641, or 771, or 861-D. The hood decal may only say 601 or 801, and the seller may just call it "a 601." The full model number is more useful than that. On Ford's 1957–1962 tractors, known as the 01 Series, the three digits tell you the chassis, the engine size, the transmission and the PTO, and a dash suffix can add the front end and the fuel. The serial number below it tells you the year.

This page walks through each digit, decodes real model numbers step by step, and shows how to check the tractor matches its stamping. It's the written companion to our video Ford 01 Series Tractors Explained.

Video: Ford 01 Series Tractors Explained (501/601/701/801/901, 1958–1962) (3:54) · Watch on YouTube

What the 01 Series is

Ford introduced the 01 Series in late 1957 as 1958 models, replacing the Hundred Series. The N Tractor Club's identification guide lists five families: the 501 (offset), 601, 701, 801 and 901. The 501, 601 and 701 were called Workmasters and used the 134 cu in gas or LP engine or a 144 cu in diesel. The 801 and 901 were Powermasters, with the 172 cu in engine in gas, LP or diesel. The guide also notes that power steering appeared as an option, and that the 01 hood emblem was the first Ford tractor emblem made of plastic (N Tractor Club Quick ID guide).

Where the numbers are stamped

The model and serial numbers are in the same place as on the Hundred Series: the flat area above and behind the starter, on the left side where the engine meets the transmission housing. The model number is the top line. The serial is below it, with a diamond symbol at each end (N Tractor Club guide). Tractor Data describes the same spot as the top left of the transmission case, behind the starter.

The stamping is shallow. Clean it with a wire brush and degreaser, not a grinder, and read it with a flashlight held low to one side.

The three digits

First digit: chassis and engine

5__One-row offset tractor, 134 cu in gas or LP-gas, or 144 cu in diesel
6__Four-wheel utility with adjustable front axle, 134 gas or LP, or 144 diesel
7__High-clearance row-crop, 134 gas or LP, or 144 diesel
8__Four-wheel utility with adjustable front axle, 172 cu in gas, LP or diesel
9__High-clearance row-crop, 172 cu in gas, LP or diesel

Second digit: transmission, PTO and lift

_1_Select-O-Speed, no PTO
_2_4-speed, no PTO and no three-point lift
_3_4-speed, no PTO
_4_4-speed with PTO and three-point lift
_5_5-speed with three-point lift and PTO (not live)
_6_5-speed with three-point lift and live PTO
_7_Select-O-Speed with single-speed PTO and three-point lift
_8_Select-O-Speed with dual-speed and ground-speed PTO and three-point lift

Third digit: series. A 1 means the 01 Series. A 0 means the earlier Hundred Series.

Suffixes: -1 tricycle with single front wheel, -4 high clearance with wide front, -5 factory wide front, -S Sherman transmission, -L LP-gas, -D diesel.

All three charts are from the N Tractor Club guide. The Select-O-Speed codes (1, 7 and 8) only make sense on tractors built after the Select-O-Speed arrived, which the guide dates to 1959. Not every combination was built in every family. Tractor Data lists eight models for the 601 (611 through 681) and seven for the 801 (no 831), but only the 541 for the 501 and the 741 and 771 for the 701.

Worked examples

The serial ranges used below are in the chart further down. All serials here are made-up examples.

641 over ◇84120◇.

  1. 6: four-wheel utility, 134 gas/LP or 144 diesel.
  2. 4: four-speed with PTO and three-point lift.
  3. 1: 01 Series, a 601 Workmaster.
  4. 84120 falls between 58,312 and 105,942, the 1959 range.

Result: a 1959 Ford 641, the basic four-speed 601 Workmaster.

541 over ◇140377◇.

  1. 5: one-row offset tractor.
  2. 4: four-speed with PTO and lift.
  3. 1: 01 Series.
  4. 140377 falls in the 1961 range (131,427 to 155,530).

Result: a 1961 Ford 541 offset Workmaster. If the stamping reads 541-4, it's the high-clearance wide-front version.

771 over ◇112650◇.

  1. 7: high-clearance row-crop, Workmaster engine.
  2. 7: Select-O-Speed with single-speed PTO and lift.
  3. 1: 01 Series.
  4. 112650 is in the 1960 range (105,943 to 131,426).

Result: a 1960 Ford 771. A 771 stamping over a 1957 or 1958 serial would be a reason to look harder, since the Select-O-Speed came in 1959.

861 over ◇11985◇ (a serial near a year break).

  1. 8: utility with the 172 engine, an 801 Powermaster.
  2. 6: five-speed with live PTO.
  3. 1: 01 Series.
  4. Here the references disagree. The N Tractor Club and My Ford Tractors start 1958 at 11,997, which makes 11985 a 1957. Tractor Data starts 1958 at 11,977, which makes it a 1958.

Result: a late-1957 or early-1958 Ford 861, sold as a 1958 model either way. Only serials between 11,977 and 11,996 fall into this gap.

881 over ◇98410◇. 8: utility, 172. 8: Select-O-Speed with dual-speed and ground-speed PTO. 1: 01 Series. 98410 is in the 1959 range. A 1959 Ford 881. The University of Nebraska tested an 881 that year (Test 701).

961 over ◇157200◇. 9: row-crop, 172. 6: five-speed, live PTO. 1: 01 Series. 157200 is above 155,531, so it's a 1962 Ford 961, a 901 Powermaster (Tractor Data lists the 961 in the 901 family).

Serial number ranges

YearN Tractor Club and My Ford TractorsTractor Data (starting serial)
19571,001–11,9961,001
195811,997–58,31111,977
195958,312–105,94258,312
1960105,943–131,426105,943
1961131,427–155,530 (N Tractor Club)131,427
1962155,531 and up (N Tractor Club)155,531

The serials run across all five families, so they date a tractor but don't identify it. A tractor with a 1957 serial was built in late 1957 as a 1958 model.

Checking the tractor matches the stamping

Stampings stay put, but engines, hoods and decals move. Confirm the number against the tractor:

  • Workmaster or Powermaster. Per the N Tractor Club, Workmasters have an all-red hood with gray on the grille, fenders and wheels, and keep the older NAA/600-style grille. Powermasters have a red hood center with gray sides and an egg-crate grille.
  • The engine casting. The guide lists block part numbers cast on the lower right side: 310905 for the 1958–1959 134, 310609 for the 1958–1959 172, B9NN-6015A for the 144 diesel, B9NN-6015C for the 134 and B9NN6015J for the 172 from late 1959 into 1960, and CONN-6015C (134) and CONN-6015J (172) from late 1960. A 6 stamping over a 172 block has had an engine swap.
  • The transmission. A 4 or 5 in the second digit means a gear lever and a conventional unsynchronized gearbox (Tractor Data lists the 641's four-speed and the 651's five-speed as unsynchronized). A 1, 7 or 8 means a Select-O-Speed, which Tractor Data lists as a 10-forward, 2-reverse full power shift (771 transmission). The N Tractor Club guide pictures the five-speed lever and the Select-O-Speed shifter side by side, and they look nothing alike.

Mistakes to avoid

  • Using the Hundred Series serial chart. Both series start their serials low, so the wrong chart gives the wrong year. Read the third digit first.
  • Confusing an 01 with an early Thousand Series. The 2000 and 4000 of 1962 to 1964 were, per the N Tractor Club, basically the 601 and 801 with a restyled grille and blue paint, and their serials also start at 1,001 in 1962. Their model numbers have five digits, not three.
  • Ordering parts by the decal. A 601 decal covers a four-speed 641 and a Select-O-Speed 681. Clutch, transmission and PTO parts depend on the second digit.
  • Assuming any 5 or 6 means live PTO. Only a 6 has the live PTO. A 651 or 851 has the five-speed with a PTO that stops when you clutch.
  • Ignoring the suffix. A -D changes the engine (and, per Tractor Data, the diesels came with a 12-volt negative-ground system instead of 6-volt positive ground). A -1 or -4 changes the front end parts.

The individual families

All Ford & Fordson tractor guides →