Ford 801 Series (1958–1962): Identifying an 841, 861 or 881 Powermaster and What to Check
A gray-and-red Ford utility tractor with an egg-crate grille is often sold as "an 801," but that tells you the series, not the tractor. Ford built the 801 Powermaster with a four-speed, a five-speed, a live PTO, a twelve-speed Sherman option and the Select-O-Speed powershift, on gasoline, LP-gas or diesel. A plain four-speed 841 and a Select-O-Speed 881 are very different tractors to own, and they're priced and repaired differently.
This page covers how to confirm it's an 801 and not an 800 or an early 4000, which 801 it is, how to date the serial, and what to check before you buy one.
What the 801 is
Ford introduced the 01 series in late 1957 as 1958 models, replacing the Hundred Series. The 172 cu in tractors, the four-wheel utility 801 and the row-crop 901, were sold as Powermasters, and the 134 cu in models as Workmasters. The 01 series added a diesel and options such as power steering (N Tractor Club Quick ID guide). The Select-O-Speed was first offered in 1959 (Farm Collector). Tractor Data lists the 801 models as built in Highland Park, Michigan, and gives the 841 an original price of $3,080 in 1957 (Tractor Data).
Tractor Data lists seven 801 models (the notes in parentheses come from the N Tractor Club decoding chart):
| 811 | Select-O-Speed, no PTO |
| 821 | 4-speed, no PTO or three-point lift |
| 841 | 4-speed (with PTO and three-point lift) |
| 851 | 5-speed (PTO not live) |
| 861 | 5-speed, live PTO |
| 871 | Select-O-Speed (single-speed PTO) |
| 881 | Select-O-Speed, dual-speed independent PTO |
The 841 is the four-speed with PTO and three-point lift, and the model Ford sent to Nebraska in 1958. The N Tractor Club's decoding chart also has a code for a four-speed without PTO (a second digit of 3), but Tractor Data doesn't list an 831.
Specifications
| Engine | Ford 172 cu in 4-cylinder overhead-valve, 3.90 x 3.60 in bore and stroke, gasoline, LP-gas or diesel |
| Transmission | 4-speed or 5-speed unsynchronized; Select-O-Speed 10 forward, 2 reverse full powershift (from 1959); optional Sherman auxiliary giving 12 forward, 3 reverse (marked 841S) |
| PTO | 540 rpm transmission-driven (841); 540 live (861); independent 540/1000 (881) |
| Hydraulics | Open-center three-point hitch, 1,250 lb rated lift |
| Electrical | 6-volt positive ground (gas and LP); 12-volt negative ground (diesel) |
| Wheelbase / weight | 74.5 in / about 2,960–3,490 lb (841); 3,500 lb (881) |
| Fuel tank | 17 gal |
| Nebraska tests | 641: 841 gas, 44.71 belt hp, 41.44 drawbar hp. 640: 851 gas, 48.37 belt hp. 653: 841 diesel, 39.99 belt hp. 701: 881 gas, 46.16 PTO hp |
| Built | 1958–1962 model years (introduced late 1957) |
Figures from Tractor Data's 841 pages (engine, transmission, tests), the 851 tests, the 861, and the 881 (transmission, tests). Tests 641, 639 (LP) and 653 were run in 1958 on 841s with the twelve-speed Sherman, and test 701 in June 1959 on a Select-O-Speed 881. The University of Nebraska archive lists test 654 as a Ford 851-D, dated June 1958 (UNL Digital Commons).
Telling it from its siblings
From an 800 (1955–1957). The N Tractor Club describes the Powermaster with a red hood center, gray hood sides and a new egg-crate grille. The 01 series also got a new front medallion, Ford's first plastic one, and new rear fenders. The Hundred Series 800 kept the earlier NAA-style grille. On the stamping, an 800 ends in 0 and an 801 ends in 1.
From a 601 Workmaster. The 601 has the 134 cu in gas engine or a 144 cu in diesel, an all-red hood with gray only on the grille, fenders and wheels, and the older NAA-600 style grille. Its stamping starts with 6.
From a 901 Powermaster. Same engine, row-crop chassis. The stamping starts with 9.
From an early 4000 (1962–1964). The N Tractor Club describes the first 2000 and 4000 as essentially the 601 and 801 with a restyled grille, no "cyclops" emblem, and Ford blue paint with lighter gray. The 4000 carries a five-digit model number. See Decoding the Ford Thousand Series.
Reading and dating the serial
The model number is stamped above the serial on the left side, on the flat area above and behind the starter, the same place as the Hundred Series. The serial sits between diamond symbols. After the three digits, the model number may carry a suffix: -S for a Sherman transmission, -L for LP-gas, -D for diesel (N Tractor Club).
| 1957 | 1,001 |
| 1958 | 11,997 (N Tractor Club, My Ford Tractors) / 11,977 (Tractor Data) |
| 1959 | 58,312 |
| 1960 | 105,943 |
| 1961 | 131,427 |
| 1962 | 155,531 |
Starting serials from the N Tractor Club guide, My Ford Tractors (through 1960) and Tractor Data. The sources agree except at the 1958 break. A tractor numbered between 11,977 and 11,996 could be a late 1957 or an early 1958, depending on which you trust.
Worked example (made-up numbers): 881 over ◇84630◇.
- First digit 8: four-wheel utility, 172 cu in.
- Second digit 8: Select-O-Speed with three-point lift and dual-speed and ground-speed PTO, per the N Tractor Club chart.
- Third digit 1: 01 series, so use the 01 chart, not the Hundred Series one.
- 84630 falls between 58,312 and 105,942: a 1959.
Result: a 1959 Ford 881. That agrees with the Select-O-Speed arriving in 1959. An 881 stamping with a 1958 serial would be worth questioning.
The block is a second check. The N Tractor Club lists the 172 cu in block's cast part number (lower right side) as 310609 for 1958–1959, B9NN6015J for late 1959 to early 1960, and CONN-6015J for late 1960–1964. An EAF 6015 block is a 1953–1957 172 from a Hundred Series tractor.
What to check before buying
- The Select-O-Speed, if fitted. Farm Collector notes the transmission had "growing pains" before Ford cleared up the problems. Warm the tractor up and pull something in every forward gear and both reverses. It should engage promptly without slipping or banging into gear. A rebuild is specialist work, so get a quote before you buy one that slips. The Ford 6000 page has more on the transmission's reputation.
- The two-stage clutch on an 861. With the PTO running, push the clutch halfway: the tractor should stop and the PTO keep turning. All the way down, both should stop.
- The fuel system and electrics. Know whether it's gas, LP or diesel before you go. A diesel is 12-volt from the factory; gas and LP tractors were 6-volt positive ground and are often converted. Check which before you connect a charger. The battery maintainer guide covers storage.
- The lift. Raise a heavy implement, shut down, and watch whether it settles.
- Loader wear. Many 801s have carried loaders. Look for cracks and welds at the front axle support and play in the spindles and steering.
- Water in the gear oil. Drain a little from the bottom of the transmission and rear end. Milky oil means water.
Mistakes to avoid
- Dating an 801 with the Hundred Series chart. The 01 series restarted its numbers, so the wrong chart gives the wrong year. Read the third digit first.
- Paying 861 money for an 851. Both are five-speeds. Only the 861 has live PTO.
- Assuming every Select-O-Speed has a 1000 rpm PTO. Tractor Data lists the 881 with an independent 540/1000 PTO. The N Tractor Club chart gives the 871 a single-speed PTO, and the 811 has none.
- Using the wrong transmission oil. Tractor Data lists Ford M2C41 for the Select-O-Speed and SAE 80 for the four-speed gearbox. Confirm against a service manual before you fill.
- Trusting the grille. Sheet metal moves between tractors. The stamping and the block casting are the record.
For how every digit works across the whole family, see Decoding the Ford 01 Series.